2.Place the status lights board on the computer base.

3.Replace the screw that secures the status lights board to the computer base.

4.Slide the status lights board cable into the system board connector and press the connector-tab down to secure the cable.

5.Replace the memory module (see Replacing the Memory Module).

6.Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

7.Replace the hard-drive assembly (follow the instructions from step 5 to step 7 in Replacing the Hard Drive).

8.Replace the keyboard (see Replacing the Keyboard).

9.Replace the battery (see Replacing the Battery).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Back to Contents Page