1.Follow the instructions in Before You Begin.

2.Place the speaker on the computer base and connect the speaker cable to the connector on the system board.

3.Replace the two screws that secure the speaker to the computer base.

4.Replace the memory module (see Replacing the Memory Module).

5.Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

6.Replace the hard-drive assembly (follow the instructions from step 5 to step 7 in Replacing the Hard Drive).

7.Replace the keyboard (see Replacing the Keyboard).

8.Replace the battery (see Replacing the Battery).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Back to Contents Page