3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 18).

5.Disconnect the battery cable from the system board (see Battery on page 20). Remove the microphone:

1.Release the ZIF connector (1) to which the microphone cable is attached, and then disconnect the microphone cable from the system board.

2.Detach the microphone (2) from the display panel assembly. (The microphone is attached to the display panel assembly with double-sided adhesive.)

3.Remove the microphone and cable. Reverse this procedure to install the microphone.

HP Slate10 HD

25