3.Remove the four Phillips PM2.0×2.75 screws (3) that secure the speakers to the display panel assembly.
4.Remove the speakers (4).
Reverse this procedure to install the speakers.
USB board
Description | Spare part number |
|
|
USB board (includes bracket, cable, micro USB port, and rubber pad) | |
|
|
Before removing the USB board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 20).
30 | Chapter 5 Removal and replacement procedures |