![](/images/new-backgrounds/1319533/31953353x1.webp)
4.Disconnect the battery cable (1) from the system board.
5.Insert a case utility tool (2) between the battery and the back cover, and then detach the battery (3) from the back cover.
6.Remove the battery (4).
Reverse this procedure to install the battery.
Speaker connector boards
Description | Spare part number |
|
|
Speaker connector board for left speaker (includes power button and volume control buttons) |
|
|
|
Speaker connector board for right speaker |
|
|
|
Before removing the speaker connector boards, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Display panel assembly on page 15).
5.Remove the connector board (see Connector board on page 19).
6.Disconnect the battery cable from the system board (see Battery on page 20).
Speaker connector boards | 21 |