USB/audio board

Description

Spare part number

 

 

USB/audio board (includes cable)

 

 

 

For use on the following model numbers only: HP: 110-1000 — 110-1099 and Compaq: 110c-1000

537614-001

— 110-1099

 

 

 

For use on the following model numbers only: HP: 110-1100 — 110-1199 and Compaq: 110c-1100

581325-001

— 110-1199

 

 

 

Before removing the USB/audio board, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer.

4.Remove the battery (see Battery on page 44).

5.If your device has WWAN capability, remove the SIM (see SIM on page 45).

6.Remove the following components:

a.Keyboard (see Keyboard on page 48).

b.Hard drive or solid-state drive (see Mass storage devices on page 54).

c.Top cover (see Top cover on page 57).

Remove the USB board:

1.Release the ZIF connector (1) to which the USB/audio board cable is connected, and disconnect the cable (2).

2.Release the USB/audio board from the clip attached to the base enclosure (3), and remove the USB/audio board (4).

64 Chapter 4 Removal and replacement procedures