OWNERS MANUAL | VERITAS™ |
Proper Usage of the Veritas™ Stand for V2.1 and V2.2 Models
The Veritas™ Stand has been purpose built not only to improve the looks of the Veritas™ bookshelf models V2.1 and V2.2, but also to place the speakers at the optimum height.
The Veritas™ speakers incorporate inserts into the speakers' bottom, to allow physically attaching the speaker to the stand for enhanced safety. Please follow the instructions in this order.
1)Begin assembly of the stand, one by one, carefully following the directions included in the stands' packaging.
2)Decide if you wish to use filler material in the stands before you complete the assembly process. Filler will not only add weight to the stand, but mass, which helps provide a solid foundation for the speaker. As well, filler material helps eliminate resonances that can transfer to the floor and “color” the resulting sound from the speaker.
3)Complete the assembly of both stands.
4)Place the speaker on the stand.
5)Using the hardware supplied with the stand, attach the speaker to it by inserting the two Philips head bolts from the bottom of the stands' top plate into the insert on the speakers' bottom. Hand tighten only!
6)The front bolt goes through the front hole on the top plate, inserted from the bottom. Insert the bolt into the speaker, the insert is situated in the middle of the speakers' base. The second bolt inserts into the
7)Once both are in place, tighten them both with a Philips screwdriver.
FIGURE 2A
FIGURE 2B
The speaker is now attached providing better stability, better sound, and of course great looks! See Figure 2B.
7
