OWNERS MANUAL
HOW TO SET UP THE CONTROLS
The following chart (Diagram “B”) will explain how to set up the controls on the Soundfield Management System. But follow these instructions first.
1)The first thing you must do is measure two distances. First measure the distance between the listening position and one of the front speakers (D1 on Diagram “A”), then measure the distance between the listening position and the rear speakers, (D2 on Diagram “A”). Subtract the two measurements, and the resulting number is the difference. The bottom scale of the chart shows the difference in distance. See Diagram “A” for assistance, and Diagram “B” for the actual chart.
Note: We do not recommend having the distance between the listener and the rear speakers to be greater than the front measurement.
2)Locate the measured difference on the bottom scale of the graph (Diagram “B”), then follow the line up to where it intersects with the horizontal line and look to the left scale to see the level control setting recommendation. The grayed section shows when the Switch should be in
3)Always experiment with the controls, and adjust them to your liking, the chart will give you a good starting point, but each room is different, and depending on the V2.0R's location, furniture placement and materials in the room, adjustments may be necessary.
VERITAS™
DIAGRAM A
DIAGRAM B
11
