Remove the tape, Install the print cartridge

4 remove the tape

1.Open the print cartridge package.

2.Pull the pink pull-tab to remove the clear tape from the print cartridge.

Do not touch or remove the ink nozzles or the copper contacts!

5 install the print cartridge

1.	Open the print cartridge door.	1	2	3
2.	Insert the HP #57 tri-color print cartridge into the print
	cartridge cradle with the copper contacts facing
	toward the inside of the printer and the ink nozzles
	facing down.
3.	Push the print cartridge into the cradle until you feel it
	snap into place.
4.	Close the print cartridge door.

Print cartridge door

6 turn on your printer

1.Press the ON button on the top of the printer.

2.Press the OK button. A calibration page prints on the previously loaded index card.

On button

OK button

7 print your first photo

1.Place a few sheets of photo paper in the paper tray with the glossy side up and the tab closest to the inside of the printer. Slide the paper underneath the output guide.

2.Move the paper width guide to fit close to the left edge of the paper without bending the paper.

3.Insert a memory card that contains digital photos into the correct memory card slot.

Note: Push the memory card into the printer until it stops—it does not insert all the way into the printer. The memory card light flashes while the printer reads the memory card.

4.Press the CANCEL button to cancel printing a photo index page.

5.When Select:#1 appears on the printer’s LCD screen, press the PRINT button to print your first photo.

OK button

Memory card slots

Print button

Memory card light

Cancel button