LEDs
On the top of the print server are Status and LAN Activity LEDs:
If the | And the |
|
Status | Activity |
|
LED is... | LED is... | Then the print server is... |
|
|
|
Off | Off | Not receiving power. |
|
|
|
On | Off | On; no LAN activity detected. |
|
|
|
On | Blinking | On; LAN activity detected. |
|
|
|
Off | On (Solid) | Encountering a fault during |
|
| operation. |
|
|
|
Blinking | Off | Encountering one of the following conditions: |
|
| ● running a |
|
| ● not configured. |
|
| ● not able to attach to the network. |
|
|
|
On | On | On; heavy LAN activity detected. |
|
|
|
Between the Status and LAN Activity LEDs is the Test button, used to print a configuration page. See Chapter 2 for more information.
On the back of the HP JetDirect 300X (J3263A) and 500X (J3265A) Print Servers, there are LEDs that indicate the operating speed (10 Mbps or 100 Mbps) (Figure 1.3). (This applies to
If the |
| And the |
|
|
10 (left) |
| 100 (right) |
| |
LED is... |
| LED is... |
| Then the print server has... |
|
|
|
|
|
Off |
| Off |
| No link established. |
|
|
|
|
|
On |
| Off |
| Link established at 10 Mbps. |
|
|
|
|
|
Off |
| On |
| Link established at 100 Mbps. |
|
|
|
| |
10 & 100 | ||||
Switches |
| LEDs | ||
Figure 1.3 Back of HP JetDirect 300X Print Server. (For the HP JetDirect 500X, the LEDs are also located next to the