QuickSpecs
HP StorageWorks 2000sa Modular Smart Array
Configuration Information
Step 2 - Choose Supported Options For SAS HBA
Select each required option with quantities specified.
SAS HBA | Description with Parts Shipped: | Part Number |
HP SC08Ge HBA | SAS HBA to connect to a host | |
Step 2b - SAS Cables (as needed for connecting MSA2000sa to an HBA) |
| |
Model Description |
| Part Number |
| ||
| ||
| ||
|
|
|
Step 3 - Options
The base controller chassis with one or two controllers has twelve drive bays for both SAS and/or SATA drives. For additional twelve additional drive bays purchase an MSA2000 3.5" Disk Enclosure. You may attach a total of three Drive Enclosures for a total of
Step 3a - MSA2 SAS and SATA Drive Options
NOTE: MSA2000 3.5 inch drives are for use only with MSA2000 products. |
|
HP StorageWorks MSA2 146GB 3G 15K 3.5 inch SAS DP HDD | AJ735A |
HP StorageWorks MSA2 300GB 3G 15K 3.5 inch SAS DP HDD | AJ736A |
HP StorageWorks MSA2 500GB 7.2K 3.5 inch SATA HDD | AJ738A |
HP StorageWorks MSA2 750GB 7.2K 3.5 inch SATA HDD | AJ739A |
HP StorageWorks MSA2 1TB 7.2K 3.5 inch SATA HDD | AJ740A |
Step 3b - Drive Enclosure Options |
|
The array itself has twelve drive bays. Should you require a drive enclosure, the model you choose depends to which array model it will be attached. If it is a single controller array, then choose the JBOD designated as "Single I/O". If it is attaching to a dual controller array then choose the "Dual I/O" JBOD
HP StorageWorks MSA2000 Single I/O 3.5 in 12 Drive Enclosure (w/ two .6m SAS cables) | AJ749A |
HP StorageWorks MSA2000 Dual I/O 3.5 inch 12 Drive Enclosure (w/ two .6m SAS cables) | AJ750A |
SAS Cables (as needed for additional Drive Enclosures where standard .6m not sufficient length) |
|
HP Ext SAS 1m Cable | |
HP Ext SAS 2m Cable | |
HP Ext SAS 4m Cable | |
|
|
DA - 13045 Worldwide — Version 1 — July 14, 2008 | Page 17 |
