Load envelopes

a. Raise the input tray

￿Raise the input tray.

b. Lower the output tray

￿Lower the output tray and pull out the tray extender.

c. Slide paper-width guide to the left.

￿Slide paper-width guide to the left.

￿Remove all paper from the main input tray. d. Load envelopes.

￿Insert one or more envelopes into far-right side of the input tray. The side to be printed on should face up. The flap should be on the left side and facing down.

￿Slide stack of envelopes down until it stops.

￿Slide paper-width guide to the right against stack of envelopes until it stops.

Load media

19