Restoring factory settings in Computer Setup

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1.Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

2.Use the arrow keys to select File > Restore defaults, and then press enter.

3.When the confirmation dialog box opens, press f10.

4.To save your changes and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the on-screen instructions.

Your changes go into effect when the computer restarts.

NOTE: Your password settings and security settings are not changed when you restore the factory settings.

Using Computer Setup 93