3 Networking (select models only)
NOTE: Internet hardware and software features vary depending on Slate model and your location.
Your Slate supports wireless Internet access. For mobile Internet access, you can use a wireless connection. Refer to Connecting to an existing WLAN on page 20 or Setting up a new WLAN network on page 21.
Using an Internet service provider (ISP)
Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless Slate to the modem, and test the Internet service.
NOTE: Your ISP will give you a user ID and password to access the Internet. Record this information and store it in a safe place.
The following features will help you set up a new Internet account or configure the Slate to use an existing account:
●Internet Services & Offers (available in some
●
●Windows Connect to the Internet
◦You already have an account with an ISP.
◦You do not have an Internet account and want to select an ISP from the list provided within the wizard. (The list of ISP providers is not available in all regions.)
◦You have selected an unlisted ISP, and the ISP has provided you with information such as a specific IP address and POP3 and SMTP settings.
To access the Windows Connect to the Internet Wizard and instructions for using it, tap Start, tap Control Panel, tap Network and Internet, and then tap Network and Sharing Center.
NOTE: If you are prompted within the wizard to choose between enabling or disabling Windows Firewall, choose to enable the firewall.
Using an Internet service provider (ISP) 19