HP 3000 Router manual LEDs, Console port, Ethernet interface

3Com Router 3000 ADSL2+ Family Getting Started Guide

LEDs

LED	Description
	OFF means no link is present.
LAN0/LAN1/LAN2/LAN3/WAN	ON means a link is present.
	Blinking means data is being sent or/and received on
	the AUX port.
SYS	Blinking means the system is operating normally.
	Steady ON or OFF means the system is improperly
	operating.
PWR	OFF means no power is being supplied.
	ON means power is being supplied.

Console port

Attribute	Description
Connector	RJ45
Interface standard	Asynchronous RS232
Baud rate	9600 (default) to 115200 bps
	Connection to an ASCII terminal
Service	Connection to the serial interface on a PC to run the
	terminal emulation program on the PC
	Command line interface (CLI)
	Auxiliary (AUX) port

Ethernet interface

Attribute	10BASE-T	10/100BASE-T
Connector	RJ45
Interface type	MDI/MDIX auto-sensing
Operating mode	10 Mbps	10/100 Mbps auto-sensing
		Full duplex/half duplex
	Full duplex/half duplex
		Supports only L2 switching

2