Removal and replacement procedures

 

 

 

Wireless button board

 

 

 

 

 

Description

Spare part number

 

 

 

 

Wireless button board (includes cable)

580060-001

 

 

 

Before removing the wireless button board, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see “Battery” on page 4-7).

5.Remove the accessory compartment cover (see “WLAN module” on page 4-9).

6.Remove the hard drive (see “Hard drive” on page 4-18).

7.Remove the keyboard (see “Keyboard” on page 4-21).

8.Remove the top cover (see “Top cover” on page 4-24).

Remove the wireless button board:

1.Turn the top cover upside down, with the front toward you.

2.Remove the Phillips PM2.0×4.0 screw 1 that secures the wireless button board to the top cover.

3.Remove the wireless button board 2.

Reverse this procedure to install the wireless button board.

Maintenance and Service Guide

4–27