ProCurve Switch 5400zl/3500yl Series Modules

Power Supplies

ProCurve Switch zl 1500W Power Supply (J8713A)

High-power 1500 W power supply for zl series switches. Supplies 900 W for PoE power plus 600 W for switch power. 200–240 V only.

Physical characteristics

Dimensions (D x W x H): 15.37 x 18.92 x 12.95 cm (6.05 x 7.45 x 5.1 in.)

Weight: 3.4 kg (7.5 lb.)

Environment

Operating temperature: 0°C to 55°C (32°F to 131°F)

Operating relative humidity: 15% to 95%, non-condensing

Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)

Non-operating/Storage relative humidity: 15% to 95%, non-condensing

Altitude: up to 3 km (10,000 ft.)

Electrical characteristics

Voltage: 200–240 VAC

Current: 10 A

Frequency: 50/60 Hz

Power consumption: 1800 W

Notes

200–240 V only. Installation of the J8713A reduces the chassis altitude specification to 3677 m (10,000 ft.).

J8713A supplies 600 W chassis power and 900 W PoE power.

See the Ordering Guide for more details on power supply selection for PoE power. Units shipped to North America include a NEMA L6-20P twist lock power cord. Non-locking NEMA 6-20P optionally available—see the Ordering Guide for more details.

When used in the J8714A power shelf, the following specs apply (at full load):

•Heat dissipation: 475 kJ/hr (450 BTU/hr) @ 220 V

•Maximum current: 5.1 A @ 220 V

NEW ProCurve 620 Redundant/External Power Supply (J8696A)

Provides redundant system power and/or extra PoE power for up to two switches simultaneously

Ports

2 RPS ports; 195 W available per port

2 EPS ports; 398 W available per port

Physical characteristics

Dimensions (D x W x H): 39.12 x 44.2 x 4.39 cm (15.4 x 17.4 x 1.73 in.) 1U height

Weight: 6.89 kg (15.2 lb.)

Electrical characteristics

Maximum heat dissipation: 422 kJ/hr (400 BTU/hr) for the actual 620 itself. PoE-powered device heat dissipation assumed to be outside the 620.

Voltage: 100–127 VAC/200–240 VAC

Current: 16 A/8 A

Power consumption: 1440 W

RPS power: 390 W

PoE power: 796 W

RPS: 12 V

PoE: –50 V

Frequency: 50/60 Hz

Note: Above figures are for max. RPS and PoE power being supplied to 2 switches simultaneously. 200–240 V power cords shipped with the 620 have a wall plug rated as close to 13 A as specific country standards allow.

Notes

The ProCurve 620 supports the ProCurve 2900 series (RPS), 3500yl series (RPS/PoE), and 6200yl (RPS) switches.

The ProCurve 5400zl switches are not supported.

The ProCurve 620 includes 4 2-meter RPS/EPS cables. These cables can be used to carry either RPS or PoE power to the switch being powered.

ProCurve Switch zl 875W Power Supply (J8712A)

Standard 875 W power supply for zl series switches. Supplies 273 W for PoE power plus 600 W for switch power.

Physical characteristics

Dimensions (D x W x H): 15.37 x 18.92 x 12.95 cm (6.05 x 7.45 x 5.1 in.)

Weight: 3.2 kg (7.05 lb.)

Environment

Operating temperature: 0°C to 55°C (32°F to 131°F)

Operating relative humidity: 15% to 95%, non-condensing

Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)

Non-operating/Storage relative humidity: 15% to 95%, non-condensing

Altitude: up to 3 km (10,000 ft.)

Electrical characteristics

Voltage: 100–127 VAC/200–240 VAC

Current: 12 A/5.7 A

Frequency: 50/60 Hz

Power consumption: 1050 W

Notes

J8712A supplies 600 W chassis power and 273 W PoE power. One J8712A can power the J8697A chassis.

Two J8712A supplies are required to power the J8698A chassis.

See the Ordering Guide for more details on power supply selection for PoE power.

When used in the J8714A power shelf, the following specs apply (at full load):

•Heat dissipation: 263 kJ/hr (250 BTU/hr) @ 110 V, 222 kJ/hr (210 BTU/hr) @ 220 V

•Maximum current: 3.2 A @ 110 V, 1.7 A @ 220 V

NEW ProCurve Switch zl Power Supply Shelf (J8714A)

A rack-mountable chassis with two slots for Switch zl power supplies to supply additional PoE power to a zl switch beyond what can be provided by the switch internal power supplies alone

Ports

2 EPS ports

PoE power available depends on power supplies installed

Physical characteristics

Dimensions (D x W x H): 24.71 x 44.3 x 13.2 cm (9.73 x 17.44 x 5.2 in.) (3U height)

Weight: 4.2 kg (9.26 lb.) (no power supplies installed)

Environment

Operating temperature: 0°C to 55°C (32°F to 131°F)

Operating relative humidity: 15% to 95% at 40°C (104°F), non-condensing

Non-operating/Storage temperature: –40°C to 70°C (–40°F to 158°F)

Non-operating/Storage relative humidity: 15% to 95% at 40°C (104°F), non-condensing

Altitude: up to 3 km (10,000 ft.)

Acoustic: power: 52.9 dB, pressure: 42.9 dB

Electrical characteristics

Description: Power draw and heat dissipation for the power shelf are dependent on the power supplies installed.

Note: For heat dissipation and power requirements of the power shelf, find and add together these figures for the 1 or 2 power supplies actually installed.

Notes

The ProCurve Switch zl Power Supply Shelf has two slots for zl power supplies. It supplies PoE power only to zl switches. For yl switches, see the ProCurve 620 Redundant/External Power Supply.

Power shelf depth includes 1.9 cm (0.75 in.) due to the power supply handles.

Power supplies not included.

Services for accessories are covered under the product in which they are installed.

15