HP Deskjet 3510 Status lights, Wireless status light, ePrint status light, Off, Test, Report, How do I, Wireless, Settings, Wireless, Settings, Wireless, Wireless, Solution

(continued)

How do I?	Instructions
Print wireless network test report.	1.	Press the Wireless button to access the
The wireless network test report will display the diagnostics results for		Wireless Status screen.
	2.	Press the Settings button to access the
the status of the wireless network, wireless signal strength, detected
networks, and more.		Wireless Settings menu.
	3.	Select Print Report, and then select Test
		Report.
Restore network settings to default settings.	1.	Press the Wireless button to access the
		Wireless Status screen.
	2.	Press the Settings button to access the
		Wireless Settings menu.
	3.	Select Restore to Default.
	4.	Confirm selection to restore defaults.
Turn wireless on or off.	1.	Press the Wireless button to access the
		Wireless Settings menu.
	2.	Select Wireless.
	3.	From the Wireless On/Off menu select On
		or Off.
Establish a Wi-Fi Protected Setup (WPS) connection.	Wi-Fi Protected Setup (WPS – requires WPS
	router)

Status lights

•Wireless status light

•ePrint status light

•On button light

Wireless status light

Get to know the HP Deskjet 3510 series

Light behavior	Solution
Off	Wireless is off. Press Wireless button to access
	wireless menu on the printer display. Use
	wireless menu to enable wireless printing.
Slow blinking	Wireless is on but not connected to a network. If
	connection cannot be established, make sure
	printer is within range of wireless signal.
Fast blinking	Wireless error has occurred. Refer to messages
	on printer display.
On	Wireless connection has been established and
	you can print.

ePrint status light

Status lights 7