| Installation |
| Phase 3: Prepare the Router Hardware |
| 4. Press [Return] and wait for either the Main menu or (if a password has |
| been set) the copyright screen, with a prompt for you to type the |
| password. |
|
|
N o t e | If your console is set to 9600 baud, you should have to press [Return] only |
| once. If the console is set to another speed, you may have to press [Return] |
| two or three times. |
Installation 1
| Figure | Frame |
| 5. | If the copyright screen appears, type the password and press [Return]. |
|
| The Main menu screen then appears. |
| 6. | The system has booted. Go on to “Initialize and Verify the Router” on |
|
| page |
|
| |
N o t e | If neither the copyright screen nor the Main menu screen appear, press | |
| [Return] again, pause, and then repeat if necessary. (Speed sensing may | |
| require more than one [Return] for your type of connection.) If pressing | |
| [Return] several times does not establish the console connection, refer to | |
| chapter 3, “Troubleshooting”. | |