USB board
Description | Spare part number |
|
|
USB board for use in 4530s models | |
|
|
USB board for use in 4730s models | |
|
|
Before removing the USB board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 47).
5.Remove the following components:
a.Bottom door (see Bottom door on page 49).
b.Optical drive (see Optical drive on page 50)
c.Keyboard (see Keyboard on page 63)
d.Top cover (see Top cover on page 65)
Remove the USB board:
1.Position the computer upright with the front toward you.
2.Lift the system board connector latch(1), and then disconnect the USB board cable from the system board (2).
3.Remove the tape (3) that secures the cable to the computer.
4.Remove the two Phillips PM2.5×5.0 screws (4) that secure the USB board to the computer.
80 Chapter 4 Removal and replacement procedures
