These preferences are specific to the touch screen and the Slate.

To change or create flick assignments:

1.Tap Start > Control Panel.

2.Tap Hardware and Sound > Pen and Touch > Flicks tab.3.Tap Navigational flicks and editing flicks, and then tap Customize.

4.Follow the on-screen instructions to change or create a flick assignment.

5.Tap OK.

Using the on-screen keyboard

Occasionally you may need to enter data into a data field. This may be required when you set up a wireless network configuration or a weather reporting location, or when you access user accounts on Internet sites. Your Slate has an on-screen keyboard that is displayed when you need to enter such information into data fields.

1.To display the keyboard, tap in the first data field. Tap the small keyboard icon that is displayed.

– or –

Double-tap the keyboard icon at the left side of the screen.

– or –

Press the Keyboard button on the left edge of the Slate.

2.To enlarge the size of the on-screen keyboard, tap the lower-right corner and drag it to the desired size.

3.Tap each character, continuing until you have spelled out the name or word that you are entering into the data field.

NOTE: Suggested words may be displayed at the top of the keyboard. If an appropriate word is displayed, tap it to select it.

4.Tap enter on the keyboard.

6 Chapter 1 Getting started