HP 505B manual System Board, Diagnostic Beep Codes, Standard and Optional Boards

System Board

Standard and Optional Boards

System boards with thermal grease, alcohol pad, and CPU socket cover

1	System board	616413-001
Memory modules
2	2 GB, PC3-10600	629026-001
		576110-001
2	1 GB, PC3-10600	629025-001
		576109-001
Other boards
*	LSI 56K modem, PCIe	490689-001
*	HP Wireless 802.11b/g/n WLAN card	538048-001
*	802.11b/g/n WLAN card, for use in ROW	498307-001
*	ATI Radeon HD4350 (RV710) PCIe x16 graphics card, 512 MB	586750-001
*	ATI Radeon HD5450 PCIe graphics card, 1 GB	601155-001
*	ATI Radeon HD5450 PCIe graphics card, 512 MB	617079-001
*	GeForce G315, PCIe graphics card, 1 GB	619934-001
*	GeForce G320, PCIe graphics card, 1 GB	615793-001
*	GeForce G210, PCIe graphics card, 512 MB	586382-001
*	Intel Gigabit NIC, includes bracket	490367-001
*	HP FireWire IEEE 1394 PCI card, FH	515182-001
*	1394 PCI card, 3 port, FH	441448-001
*	Antenna, dual band, 802.11	583345-001
AMD Athlon II X2 processors with alcohol pad and thermal grease:
*	X4 645, dual core, 2-MB cache, 3.1 GHz	628883-001
*	X4 640, dual core, 2-MB cache, 3.0 GHz	614516-001
*	X4 635, dual core, 2-MB cache, 2.9 GHz	617834-001
*	X4 630, dual core, 2-MB cache, 2.8 GHz	586735-001
*	X3 450, dual core, 1.5-MB cache, 3.2 GHz	628882-001
*	X3 445, dual core, 1.5-MB cache, 3.1 GHz	614515-001
*	X3 440, dual core, 1.5-MB cache, 3.0 GHz	617833-001
*	X3 435, dual core, 1.5-MB cache, 2.9 GHz	586733-001
*	X3 425, dual core, 1.5-MB cache, 2.7 GHz	586732-001
*	X2 265, dual core, 1-MB cache, 3.3 GHz	628881-001
*	X2 260, dual core, 1-MB cache, 3.2 GHz	614513-001
*	X2 255, dual core, 1-MB cache, 3.1 GHz	617832-001
*	X2 250, dual core, 1-MB cache, 3.0 GHz	584221-001
*	X2 245, dual core, 1-MB cache, 2.9 GHz	586731-001
*	X2 240, dual core, 1-MB cache, 2.8 GHz, C2	584222-001
*	X2 220, dual core, 1-MB cache, 2.8 GHz, C3	611192-001
*	X2 215, dual core, 1-MB cache, 2.7 GHz	586730-001
AMD Phenom II processors with alcohol pad and thermal grease:
*	X4 955, quad core, 2-MB cache, 3.2 GHz	614519-001
*	X4 945, quad core, 2-MB cache, 3.0 GHz	586741-001
*	X4 910, quad core, 2-MB cache, 2.6 GHz	586740-001
*	X4 820, quad core, 2-MB cache, 2.8 GHz	586739-001
*	X4 810, quad core, 2-MB cache, 2.6 GHz	586738-001
*	X3 740, triple core, 1.5-MB cache, 3.0 GHz	586737-001
*	X2 550, dual core, 1-MB cache, 3.1 GHz	614518-001
AMD Sempron processor with alcohol pad and thermal grease:
*	145, single core, 1-MB cache, 2.8 GHz	611196-001
*	140, single core, 1-MB cache, 2.7 GHz	586742-001

* Not shown

System Board Connectors and Jumpers (position of some untitled components may vary in location)

PROCESSOR	Processor socket	CHASSIS_	Chassis fan connector
		FAN1
XMM1-2	Memory slots	PCI1	PCI slot
CPU FAN	Fan connector	SPDIF_OUT2	S/PDIF connector
ATX_POWER	24-pin main power connector	F_AUDIO	Front panel audio connector
SATA0-3	Drive connectors	PCIE_X1_2	PCIe x1 slot
CMOS+PW	CMOS password header	PCIE_X1_1	PCIe x1 slot
F_PANEL	Front I/O connector	PCIE 16X	PCIe x16 slot
F_USB4	Internal USB connector	AUDIO	External in/out connectors
F_USB3	Internal USB connector	LAN+USB	Stacked network/USB
			connectors
F_USB2	Front I/O connector	ATX_CPU	4-pin CPU power connector
F_USB1	Front I/O connector	USB	Stacked USB connectors
BATTERY	RTC battery socket	VGA	Monitor connector

Diagnostic Beep Codes

The Power-On Self-Test (POST) is a series of diagnostic tests that runs automatically when the computer is powered on. If the POST detects an error, this causes an audible beep code to sound. The POST beep codes are not necessarily accompanied by an associated, visible error code or text message.

The following table shows the POST beep codes, their meanings, and the recommended actions for solving the problem.

Diagnostic Beep Codes

Beeps	Diagnosis	Recommended Action
1 short, 1 long,	Bad memory or memory configura-	Check that the memory modules
3 sec pause	tion error	have been installed correctly and
		that proper modules are used.
2 short, 1 long,	No graphics card installed or graph-	For systems with a graphics card:
3 sec pause	ics card initialization failed.	1.	Reseat the graphics card. Power
			on the system.
		2.	Replace the graphics card.
		3.	Replace the system board.
		For systems with integrated graph-
		ics, replace the system board.
3 short, 1 long,	CPU configuration error or invalid	For systems with a graphics card:
3 sec pause	CPU detected before graphics card	1.	Reseat the graphics card. Power
	initialized.
			on the system.
		2.	Replace the graphics card.
		3.	Replace the system board.
		For systems with integrated graph-
		ics, replace the system board.
1 short, 1 sec	No legacy floppy drive or optical	1. Check cable connections.
pause	drive found	2.	Run the Setup utility and ensure
			the device port is enabled.
2 short, 3 sec	No floppy diskette or CD found	1. Check the type of drive you are
pause			using and use the correct media
			type.
		2.	Replace the diskette or CD with a
			new one.
3 short, 3 sec	Flashing not ready (missing utility	Upgrade the BIOS to proper ver-
pause	or BIOS image file, etc.)	sion.
4 short, 3 sec	Flashing operation has failed	1. Verify the correct ROM.
pause	(checksum error, corrupted image,	2.	Flash the ROM if needed.
	etc.)
		3.	If an expansion board was
			recently added, remove it to see if
			the problem remains.
		4.	Clear CMOS.
		5.	If the message disappears, there
			may be a problem with the
			expansion card.
		6.	Replace the system board.
5 short, 3 sec	BIOS recovery was successful	No action required.
pause

HP 505B, MT 635951-001 page 2