b.If you are installing a media card reader, connect the USB cable to the system board. If the media card reader has a 1394 port, connect the 1394 cable to the PCI card.

Figure 2-26Connecting the Media Card Reader USB Cable

Figure 2-27Connecting the Media Card Reader 1394 Cable

10.If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector.

NOTE: If you are installing a new optical drive, connect the SATA cable to the next available SATA system board connector in the following order: SATA1, SATA2, then SATA3.

Refer to System Board Drive Connections on page 24 for an illustration of the system board drive connectors.

11.Replace the front bezel and computer access panel.

30 Chapter 2 Hardware Upgrades

ENWW