![](/images/backgrounds/290977/hp-compaq-6005-pro-small-form-factor-pc-setup-and-install-14139916x1.png)
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 5 Computer
Option | Description | |
|
| |
OS Power | ● S5 Maximum Power | |
Management | system as much as possible in the S5 state. Power is removed from the wake up circuitry, the | |
| expansion slots, and any management features while in S5. | |
| ● Idle Power | |
| processors power consumption when the processor is idle. | |
| ● ACPI S3 Hard Disk | |
| accept commands after resuming from S3 before returning control to the operating system. | |
| ● ACPI S3 PS2 Mouse | |
| ● USB Wake on Device Insertion (some | |
| device insertion. | |
| ● Unique Sleep Blink | |
| sleep state the system is in. Each sleep state has a unique blink pattern: | |
| ◦ | S0 = Solid green LED. |
| ◦ | S3 = 3 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., |
|
| repeated cycles of 3 blinks and a pause. |
| ◦ | S4 = 4 blinks at 1Hz (50% duty cycle) followed by a pause of 2 seconds (green LED), i.e., |
|
| repeated cycles of 4 blinks and a pause. |
| ◦ | S5 = LED is off. |
| NOTE: If this feature is disabled, S4 and S5 both have the LED off. S1 (no longer supported) | |
| and S3 use 1 blink per second. | |
|
| |
Thermal | Fan idle | |
| NOTE: This setting only changes the minimum fan speed. The fans are still automatically | |
| controlled. | |
|
|
|
10 Computer Setup (F10) Utility | ENWW |