![](/images/backgrounds/290977/hp-compaq-6005-pro-small-form-factor-pc-setup-and-install-14139917x1.png)
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 6 Computer
Option | Description | |
|
| |
Allows you to set: | ||
| ● POST mode (QuickBoot, Clear Memory, FullBoot, or FullBoot Every x Days). | |
| ◦ | QuickBoot = Do not clear memory or perform a memory test. |
| ◦ | FullBoot = Memory test (count) on cold boot. Clears memory on all boots. |
| ◦ | Clear Memory = No memory count on cold boot. Clears memory on all boots. |
| ◦ | FullBoot Every x Days = Memory count on 1st cold boot on or after the xth day. No more |
|
| memory counts until 1st cold boot on or after x days. Clears memory on all boots. |
| ● POST messages (enable/disable). | |
| ● F9 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text F9 = | |
| Boot Menu during POST. Disabling this feature prevents the text from being displayed. | |
| However, pressing F9 will still access the Shortcut Boot [Order] Menu screen. See Storage > | |
| Boot Order for more information. | |
| ● F10 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text | |
| F10 = Setup during POST. Disabling this feature prevents the text from being displayed. | |
| However, pressing F10 will still access the Setup screen. | |
| ● F11 prompt (hidden/displayed). Setting this feature to displayed will display the text | |
| F11 = Recovery during POST. Hiding this feature prevents the text from being displayed. | |
| However, pressing F11 will still attempt to boot to the recovery partition. See Factory Recovery | |
| Boot Support for more information. | |
| ● F12 prompt (enable/disable or hidden/displayed). Enabling this feature will display the text | |
| F12 = Network during POST. Disabling this feature prevents the text from being displayed. | |
| However, pressing F12 will still force the system to attempt booting from the network. | |
| ● Factory Recovery Boot Support (enable/disable). Enabling this feature will cause an additional | |
| prompt, F11 = Recovery, to be displayed during POST on systems with a recovery partition | |
| on the boot hard drive. Pressing F11 causes the system to boot to the recovery partition. The | |
| F11 = Recovery prompt can be hidden with the F11 prompt (hidden/displayed) option (see | |
| above). | |
| ● Option ROM prompt (enable/disable) Enabling this feature will cause the system to display a | |
| message before loading option ROMs. (This feature is supported on some models only.) | |
| ● Remote wakeup boot source (remote server/local hard drive). | |
| ● After Power Loss (off/on/previous state): Setting this option to: | |
| ◦ | |
| ◦ | |
| ◦ | Previous |
|
| restored, if it was on when power was lost. |
|
|
|
ENWW | Computer Setup (F10) Utilities 11 |