28 HP Jornada 600 Series User’s Guide

There are many Windows CE programs available, including freeware and shareware. Go to www.microsoft.com/windowsce, or try searching the Web on the keyword “Windows CE” to find additional programs for your HP Jornada. Be sure to install only programs that are compiled for SH3 processors.

Installing Windows CE Services

The minimum PC requirements for running Windows CE Services are as follows:Desktop PC with a 486/33DX or higher processor (Pentium® P90 recom- mended)Microsoft Windows NT Workstation 4.0 or Windows 95 (or later)

8 MB of memory (12 MB recommended) for Windows 95 (or later), and 16 MB of memory (32 MB recommended) for Windows NT Workstation

Hard disk drive with 10 to 50 MB of available hard disk space (actual requirements will vary, based on selection of features and current system configuration)

Available 9-pin serial communications portCD-ROM driveVGA or higher resolution graphics card (SVGA 256-color recommended)

To install Windows CE Services

1.Insert the Desktop Software for Microsoft Windows CE compact disc into the CD-ROM drive on your desktop PC.

2.The Windows CE Services Setup Wizard should start automatically. If it does not start, click Run on the Start menu, and then type d:\setup, where d is the letter assigned to your CD-ROM drive.

3.Follow the instructions that appear on your screen to set up Win- dows CE Services, and then restart your desktop PC.

4.After you restart your PC, the Windows CE Services Get Connected dialog box appears, prompting you to connect your HP Jornada.

If you connect using the docking cradle or sync cable, connect your device as described in the next section, Connecting by serial connection, and then click Start.

If you connect by infrared, click Cancel, and then skip to the section Connecting by infrared, later in this chapter.