additional setup information

set the language and country/region

Usually, the language and country/region are set when you install the HP OfficeJet. If you set the country/region or language incorrectly during installation, use the following procedure.

1Press Menu.

2Press 7, then press 4.

This selects Maintenance, and then selects Set Language & Country/ Region.

You are prompted with a list of languages. You can also scroll through the languages using or .

3Using the keypad, enter the two-digit number for the desired language.

4When prompted, press 1 for Yes or 2 for No to confirm the language.

You are prompted with all the countries/regions for the selected language. You can also scroll through the countries/regions using or .

5Using the keypad, enter the two-digit number for the desired country/ region.

6When prompted, press 1 for Yes or 2 for No to confirm the country/ region.

7You can confirm the language and country/region by printing a Self-Test Report, as follows:

a.Press Menu.

b.Press 3, then press 5.

This selects Print Report, and then selects Self-Test Report.

connect your hp officejet to your computer

Your HP OfficeJet supports HOT Swapping, meaning you can connect to the HP OfficeJet while the power is on at your computer and on the HP OfficeJet.

connect your usb port

Connecting your computer to your HP OfficeJet with USB is straightforward. Simply plug one end of the USB cable into the back of your computer and the other in the back of the HP OfficeJet.

what works

what does not work

 

 

Plugging into the USB port on your

Plugging into the USB port located

computer

on the keyboard

 

 

Plugging into a powered hub that is

Plugging into a non-powered USB

connected to the USB port on your

hub

computer

 

Note: AppleTalk is not supported.

 

reference guide

51