HP 610c What you need to do, Envelopes, Single envelope, 7.Print the cards, Print the envelope, slot until it stops, Remove the OUT tray, Raise the card guide

Printing on Different Kinds of Paper

English

Card guide in up position

Paper-width Adjuster

Paper-length Adjuster

OUT tray removed for loading cards, etc.

OUT Tray

Single envelope slot

What do you want to print	What you need to do
Envelopes	1.	Slide the envelope, with its flap up and on the right, evenly into the single envelope
Single envelope		slot until it stops.
	2.	Choose print settings that match the type and size of the envelope.
	3.	Print the envelope.
	4.	Reset the software for the paper in the IN tray after printing completes.

Stack of up to 20 envelopes	1.	Slide out both of the paper adjusters.
	2.	Remove any paper from the IN tray.
	3.	Slide the envelopes, with the flap side up and on the right, evenly into the IN tray.
	4.	Slide paper adjusters snugly against the edges of the envelopes.
	5.	Choose print settings that match the type and size of the envelopes.

6.Print the envelopes.7.Reset the software for the paper in the IN tray after printing is completed.

Index cards and postcards	1.	Remove the OUT tray.
	2.	Raise the card guide.
	3.	Insert up to 1/4 inch (1/2 cm) stack of cards into the IN tray. Align the right edge of
		the stack with the card guide.
	4.	Slide the paper adjusters snugly against the edges of the cards.
	5.	Replace the OUT tray.
	6.	Choose print settings that match the type and size of the cards.

7.Print the cards.8.Reset the software for the paper in the IN tray after printing is completed.