To connect the camera to a Macintosh computer
1Make sure the camera is turned off.
2 Plug the smaller end of the USB cable (supplied) into the camera.
3Plug the flat end of the cable into
any USB port on your computer.
Note | When the camera is |
| connected to your |
| computer, only the power control operates. The |
| other camera buttons do not respond. |
Unloading images to a Macintosh computer
Unloading images is the process of copying images from the camera to your computer. If you have a CF memory card installed in the camera, images will be copied from the CF memory card to the computer.
You can unload images from your camera in one of two ways: automatically or by mounting the camera as a disk drive. The automatic unload procedure is the preferred method.
Tip | To conserve battery power, you can use an HP- |
| approved ac power adapter (optional) when you are |
| unloading images to your computer. |
|
|
To automatically unload images to a Macintosh computer
1Connect the camera to your computer by using the USB cable.
2Turn on the camera.
The status LCD displays PC to indicate the camera is connected to a computer.
Sharing and printing images | 33 |