Chapter 10

•Notice to users in Korea•Noise emission statement for GermanyRegulatory model identification number

For regulatory identification purposes, your product is assigned a Regulatory Model Number. The Regulatory Model Number for your product is SNPRB-1101-01. This regulatory number should not be confused with the marketing name (HP Photosmart 6510 series, etc.) or product numbers (CQ761, etc.).

FCC statementFCC statement

The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient the receiving antenna.•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.For further information, contact:Manager of Corporate Product Regulations Hewlett-Packard Company3000 Hanover StreetPalo Alto, Ca 94304(650)857-1501Modifications (part 15.21)

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

VCCI (Class B) compliance statement for users in Japan

䛣

䚸䜽䝷䝇B䛷䛩䚹䛣

䚸

䛷

䛩䜛䛣䛸䜢

䛸䛧䛶

䛔䜎䛩

䚸䛣

䝷䝆䜸

䝔䝺䝡䝆䝵䞁

䛻

䛧䛶

䛥

䜛䛸䚸䜢 䛝
䛣䛩䛣䛸䛒䜚䜎䛩䚹䛻 䛳䛶䛧䛔 䜚䛔䜢䛧䛶䛥䛔䚹

 

VCCI-B
54 Technical information