@Part NO, 14515A

145 25A

nescriptim

Rack Kit for Mounting one 54” H supply in a standard 19” EIA rack. (Refer to Section II for details. )

Rack Kit for mounting two 5+” H supplies in a standard 19” EIA rack. (Refer to Section II for details. )

respectively.

The third

part is the

power

supply

serial number:

a different

sequential

number is as-

signed TVeach power supply.

 

 

l-19 If the serial number prefix on your power supply does not agree with the prefix on the title page of this manual, use the change page that is

included to update the manual to the proper serial number. Where applicable, backdating tnformation is given in an appendix at,the rear of the manual.

l-1Y INSTRUMENT IDENTIFICATION

l-18 Hewtett-Packard power supplies are icienti- fied by a three-part serial number tai. The first part is the power suwly model number. The set- and part i3 the swial’number prefix, which consists

of a number-letter combination that denotes the date of a significant de&vi change. The number

l-20 ORDERING ADDITIONAL MANUALS

l-21 One manual is shipped with each power sup- ply. Additional manuals may be purchased from your local @ sales office (see list at i-ear of this

manual for addresses). Specify the model number, serial number prefix, and @ St&k number provided on the title page,