HP Designjet 70/110plus Printer
How do I clean a printhead? (continued)
10.When both the printhead and the contacts inside the carriage are dry,
11.Pull the printhead cover towards you, ensuring that the hook at its front edge latches onto the tab, and then push it away from you to close the cover.
12.Plug in the printer power cable.
13.Close the rear part and then the front part of the outer flap.
14.We strongly recommend that you perform an alignment check, to ensure the best quality printing. See “How do I align printheads?” on page 31.
There must be paper in the tray during alignment (you can use your least expensive paper).
15.Check that the printhead icon on the front panel is no longer flashing. If this is the case, the printhead has been
26