Possible cause Solution
The batteries Reset the date and time by using died or were the camera menus. See the removed from section called Date & time on the camera for page 38.
more than 10 minutes.
Extended Use an HP AC adapter to power Image Display the camera when you are using
use and the Image Display for an excessive flash extended period of time and use consume a when you are unloading several lot of battery images to your computer.
power. Use the flash only when needed.
Do not use ordinary alkaline batteries. Purchase higher-grade batteries, such as
“ultra” or “premium” grade alkaline or photo-lithium batteries, or switch to rechargeable NiMH batteries.
The NiMH You must recharge all NiMH batteries you batteries after fully draining them are using were four times for the batteries to
recharged reach their optimum capacity
incorrectly. and performance.
Problem
The wrong date and/or time is shown.
I replace the camera batteries frequently.
53 |