Unloading images to a computer using the dock

NOTE If you are using a Macintosh computer, switch the camera to Disk Drive in the USB Configuration menu found in the Setup menu.

1Check that the HP Camera Dock is connected to your computer.

2Place the camera in the Camera Dock. It will turn on automatically, and a dock intro screen will appear.

3Press the button on the dock to start the unload process. The HP Image Unload software will launch on your computer, and the images in the camera will automatically unload to the computer. If there were any images on the camera that had been selected in the Share menu for printing or e-mail, those actions are started after the images have been unloaded to the computer.

4The camera will return to the dock intro screen when your images have been saved and shared. You can now take the camera out of the dock, or leave it there to recharge the camera batteries.

Appendix B: Camera dock

75