9Press the Eject button on the top CD-ROM drive, and wait for the tray to open. Insert Recovery CD #1 and close the tray.

10Press the F10 key to save the changes and exit BIOS.

11With Yes selected, press Enter.

12The PC starts the recovery; wait for the onscreen instructions to display, and then follow those instructions:

■For standard recovery, press R, and then press R again. Click Next to proceed with the non-destructive system recovery. Click Yes to start the recovery. Insert the remaining CDs when directed.

Or

■If your PC hard disk drive is blank or corrupted, press R to perform a full system recovery. Insert the remaining CDs when directed.

13

When the recovery program finishes, click

 

 

Restart to restart the computer.

 

14

Before the computer restarts, the CD tray

 

 

ejects. Remove the CD.

 

15

Return the BIOS to the original setting. Enter

 

 

the BIOS setup program during the startup:

 

 

When the blue screen with the HP Invent logo

Recovery

 

have a few seconds to press the F1 key

 

appears, press the F1 key on the keyboard

 

 

until Entering SETUP is displayed. (You only

 

 

before the normal startup process continues.)

 

16

Wait until the BIOS setup program opens.

 

 

Press the right arrow key to select Boot.

 

17

Press the down arrow key to select

 

 

Boot Device Priority, and then press Enter.

 

Quick Start Guide 87