HP 7900 manual Q3020, Unpack your printer, Plug in the power cord, Select your language

*Q3020- 90159*

Q3020-90159 1

hp photosmart

7900 series

setup guide

Windows PC:

Do not connect the printer to your computer with the USB cable until prompted by the installation software.

HP #57

HP #58

HP #56

HP #59

Macintosh:

Do not connect the printer to your computer with the USB cable until the software installation has finished.

unpack your printer

Note: Purchase a USB cable separately.

See the HP Photosmart Basics Guide for a description of the items included with your printer.

2

plug in the power cord

3

1

2

3

Paper catch

Paper width guide Photo tray slider

In tray Paper length guide

4

On button OK button

Select Photos button

load plain paper in the in tray

1.Lift the paper catch.

2.Pull out the paper length guide on the In tray and slide the paper width guide as far to the left as it will go.

3.Place a stack of plain paper in the In tray.

4.Adjust the paper width guide and paper length guide to fit close to the edges of the paper without bending the paper.

5.Lower the paper catch.

6.Make sure that the photo tray slider is pulled forward (toward you). This disengages the photo tray.

Note: Store photo paper in the resealable storage bag provided.

select your language

1.Press the ON button to turn on the printer.

A list of languages appears on the printer’s LCD screen.

2.	Press the SELECT PHOTOS	button to highlight your
	language, and then press the OK button.
3.	Press the SELECT PHOTOS	button to highlight Yes
	to confirm your language selection, and then press
	the OK button.
	A list of countries and regions appears on the
	printer’s LCD screen.
4.	Press the SELECT PHOTOS	button to highlight your
	country or region, and then press the OK button.

5

Do not touch the ink nozzles or the copper contacts!

HP #58	HP #59
	or
HP #57	HP #56

58 + 57 + 59

Print cartridge protector

58 + 57 + 56

install the print cartridges

1.If the printer is off, press the ON button.

2.Press the DOOR OPEN button and open the main door.

3.Open each print cartridge cradle latch by pulling each latch forward and then up.

4.Pull the pink pull-tab to remove the clear tape from the HP #58 photo, HP #57 tri-color, and the

HP #59 photo gray print cartridges. Do not touch or remove the copper contacts.

5.Insert the HP #58 photo print cartridge in the left stall.

Insert the HP #57 tri-color print cartridge in the middle stall.

Insert the HP #59 photo gray print cartridge in the right stall.

6.Close the print cartridge cradle latches by pushing down on each latch until it snaps into place.

7.Close the main door and press the OK button to print a calibration page.

For highest quality color	or	58	+ 57 + 59
black and white photos:

For documents and photos: 58 + 57 + 56

store the additional print cartridge

58 + 57 + 59

58 + 57 + 56

Print cartridge storage area	Store the unused print cartridge in the print cartridge
	protector in the print cartridge storage area in your
	printer.