HP 8100 both, Caution, To print…, Insert this print, Insert this print, Do not touch here, Remove the pink tape, Insert the cartridges, cartridge in the left stall

Chapter 2

Use the correct print cartridges (continued)

To print…	Insert this print	Insert this print
	cartridge in the left stall	cartridge in the right stall
Black-and-white photos	HP Tri-color #95 or #97	HP Gray Photo #100
Sepia or antique photos	HP Tri-color #95 or #97	HP Photo #99
Text and colored line	HP Tri-color #95 or #97	HP Black #96
drawings

Caution Check that you are using the correct print cartridge. Also, note that HP does not recommend modifying or refilling HP cartridges. Damage that results from modifying or refilling HP cartridges is not covered by the

HP warranty.

For best print quality, HP recommends that you install all retail print cartridges before the date stamped on the box.

Insert or replace the print cartridgesPrepare the printer and cartridges

1.Make sure the power is on and you have removed the cardboard from inside the printer.

2.Lift the main cover of the printer.

3.Remove the bright pink tape from both cartridges.

Remove the pink tape	Do not touch the ink nozzles or the copper-colored
	contacts, and do not re-tape the cartridges.

Do not touch hereInsert the cartridges

1.If you are replacing a cartridge, push down and pull outward on the cartridge stall cover to open it and then pull the cartridge out.

2.Match the symbol on the cartridge label to the correct stall. Hold the cartridge with the label on top and slide it at a slight upward angle into the stall so the copper-colored contacts go in first. Push the cartridge until it snaps into place.

3.Close the cartridge stall cover.

4.Repeat the previous steps to install the second cartridge, if necessary.

18 HP Photosmart 8100 series