Command Line Interface Reference Guide | aaa |
| |
■mac-list1-- Manage MAC address based network authentication on the device port(s). ([ethernet] PORT-LIST) (p. 39)
■addr-limit< 1 to 32 > -- Set the port's maximum number of authenticated MAC addresses (default 1). (NUMBER) (p. 27)
■addr-moves-- Set whether the MAC can move between ports (default disabled - no moves). (p. 27)
■auth-vid-- Configures VLAN where to move port after successful authentication (not configured by default). (p. 30)
■VLAN-ID-- Configures VLAN where to move port after successful authentication (not configured by default). (VLAN-ID) (p. 54)
■logoff-period< 1 to 9999999 > -- Set the period of time of inactivity that the switch considers an implicit logoff (default 300 seconds). (NUMBER) (p. 36)
■max-requests< 1 to 10 > -- Set maximum number of times the switch retransmits authentication requests (default 3). (NUMBER) (p. 39)
■quiet-period< 1 to 65535 > -- Set the period of time the switch does not try to authenticate (default 60 seconds). (NUMBER) (p. 47)
■reauthenticate -- Force re-authentication to happen. (p. 47)
■reauth-period< 0 to 9999999 > -- Set the re-authentication timeout in seconds; set to '0' to disable re-authentication (default 0). (NUMBER) (p. 47)
■server-timeout< 1 to 300 > -- Set the authentication server response timeout (default 30 seconds). (NUMBER) (p. 50)
■unauth-vid-- Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default). (p. 53)
■VLAN-ID-- Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default). (VLAN-ID) (p. 54)
■PORT-LIST-- Manage general port security features on the device port(s). ([ethernet] PORT-LIST)
(p. 43)
■controlled-direction< both in > -- Configure how traffic is controlled on non-authenticated ports; in BOTH directions (ingress+egress) or IN only (ingress). (NUMBER) (p. 32)
■supplicant -- Manage 802 ([ethernet] PORT-LIST) (p. 51)
■auth-timeout< 1 to 300 > -- Set the challenge reception timeout (default 30sec.). (NUMBER)
(p. 30)
■clear-statistics-- Clear the supplicant statistics. (p. 31)
■held-period< 0 to 65535 > -- Set the held period (default 60sec.). (NUMBER) (p. 35)
■identity -- Set the identity(user name) to be used by the supplicant. (ASCII-STR) (p. 35)
■secret --(p. 50)
■initialize -- Reinitialize the supplicant state machine. (p. 35)
■max-start< 1 to 10 > -- Define the maximum number of attempts taken to start authentication (default 3). (NUMBER) (p. 40)
■secret -- Trigger the command to ask user for a password for the supplicant to use. (p. 50)
■start-period< 1 to 300 > -- Set a period of time between EAPOL-Start packet retransmission (default 30sec.). (NUMBER) (p. 51)
■web-based-- Configure web authentication based network authentication on the device or the device's port(s) (p. 55)
■dhcp-addr-- Set the base address / mask for the temporary pool used by DHCP (base address default is 192.168.0.0, mask default is 24 - 255.255.255.0). (IP-ADDR/MASK-LENGTH) (p. 33)
■dhcp-lease< 5 to 25 > -- Set the lease length of the IP address issued by DHCP (default 10). (NUMBER) (p. 33)
■ewa-server-- IP address or hostname of the enhanced web authentication server on the device. (p. 34)
■host-name-- Hostname of the enhanced web auth server. (ASCII-STR) (p. 35)
■page-path-- Sets the path of the login pages to be found on the ewa server. (ASCII-STR) (p. 42)
