Command Line Interface Reference Guide | aaa |
| |
■ip-addr-- IP address of the enahced web auth server. (IP-ADDR) (p. 35)
■page-path-- Sets the path of the login pages to be found on the ewa server. (ASCII-STR) (p. 42)
■web-list1-- Manage web authentication based network authentication on the device port(s). ([ethernet] PORT-LIST) (p. 57)
■auth-vid-- Configures VLAN where to move port after successful authentication (not configured by default). (p. 30)
■web-authvid-- Configures VLAN where to move port after successful authentication (not configured by default). (VLAN-ID) (p. 55)
■client-limit< 1 to 32 > -- Set the port's maximum number of authenticated clients (default 1). (NUMBER) (p. 31)
■client-moves-- Set whether the client can move between ports (default disabled - no moves). (p. 31)
■logoff-period< 1 to 9999999 > -- Set the period of time of inactivity that the switch considers an implicit logoff (default 300 seconds). (NUMBER) (p. 36)
■max-requests< 1 to 10 > -- Set maximum number of times the switch retransmits authentication requests (default 3). (NUMBER) (p. 39)
■max-retries< 1 to 10 > -- Set number of times a client can enter their credentials before authentication is considered to have failed (default 3). (NUMBER) (p. 39)
■quiet-period< 1 to 65535 > -- Set the period of time the switch does not try to authenticate (default 60 seconds). (NUMBER) (p. 47)
■reauthenticate -- Force re-authentication to happen. (p. 47)
■reauth-period< 0 to 9999999 > -- Set the re-authentication timeout in seconds; set to '0' to disable re-authentication (default 0). (NUMBER) (p. 47)
■redirect-url-- Set the URL that the user should be redirected to after successful login (default none), Specify url up to 103 characters length. (p. 48)
■web-redirect-url-- Set the URL that the user should be redirected to after successful login (default none), Specify url up to 103 characters length. (ASCII-STR) (p. 58)
■server-timeout< 1 to 300 > -- Set the authentication server response timeout (default 30 seconds). (NUMBER) (p. 50)
■ssl-login-- Set whether to enable SSL login (https on port 443) (default disabled). (p. 50)
■unauth-vid-- Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default). (p. 53)
■web-unauthvid-- Configures VLAN where to keep port while there is an unauthorized client connected (not configured by default). (VLAN-ID) (p. 58)
COMMAND DETAILS
