Receiver Sensitivity | HP 8710p manual

	Extensions Program Version 4) with Microsoft Windows 2000 and XP
	only.
Sub-channels	Multinational support with frequency bands and channels compliant to
	local regulations.
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture	Ad-hoc (Peer to Peer)
Models	Infrastructure (Access Point Required)
Roaming	IEEE 802.11 compliant roaming between access points
Output Power (for	15 dBm
CKK)2
Output Power (for	15 dBm
OFDM; power varies by
data rate)2
Power Consumption	Transmit: 1.6 Watts (average)
	Receive: 1.1 Watts (average)
	Idle mode3: 30 mW (average)
	Radio off: 20 mW (max)
Power Management	ACPI compliant power management
	802.11 compliant power saving mode
Receiver Sensitivity4	54 Mbps: -74 dBm, 6 Mbps: -90 dBm
Antenna Connections	2 U.FL type connectors, 50 ohm nominal impedance
Range	802.11 a – Typical	600 feet – Outdoor Open Area
	(@6 Mbps)	150 feet – Indoor, Office environment
	802.11 b – Typical	1200 feet – Outdoor Open Area
	(@1 Mbps)	300 feet – Indoor, Office environment
	802.11 g – Typical	1200 feet – Outdoor Open Area
	(@1 Mbps)	300 feet – Indoor, Office environment
Form Factor	PCI-Express MiniCard
Weight	0.013 lb (6 g)
Dimensions	0.19 x 1.2 x 2.0 in (4.75 x 29.85 x 50.8 mm)
Operating Voltage	3.3V +/- 9%, 1.5V +/- 5%
Temperature	Operating	32° to 176° F (0° to 80° C)
	Non-operating	–40° to 176° F (–40° to 80° C)
Humidity	Operating	10% to 90% (non-condensing)
	Non-operating	5% to 90% (non-condensing)
Altitude	Operating	0 to 10,000 ft (3,048 m)
	Non-operating	0 to 50,000 ft (15,240 m)

DA - 12716 Europe, Middle East and Africa QuickSpecs — Version 8 — 8.1.2007

Page 25

HP 8710p manual Receiver Sensitivity