HP a115.uk, a170.uk, a118.uk, a120.uk, a110.uk manual Restarts, a series of startup screens appear. To

13When the recovery program finishes, click Restart to restart the PC.

14Before the PC restarts, the CD tray ejects. Remove the CD.

15Return the BIOS to the original setting. During the startup, when the blue screen with the logo appears, press the F1 key on the keyboard until Entering SETUP is displayed. (You only have a few seconds to press the F1 key before the normal startup process continues.) Wait until the BIOS setup program opens.

16Press the right arrow key to select Boot.

17Press the down arrow key to select

Boot Device Priority, and then press Enter on the keyboard.

18Return the first boot device to the original setting using one of these methods:

■Press the down arrow key or up arrow key to select the CD-ROMitem. Press the – (minus) key to move the CD-ROMitem down until it is the third item in the list.

Or

■Press the down arrow key to highlight the First Boot Device selection. Press the + (plus) key until Floppy is the selection.

19	Press the F10 key to save the changes and
	exit BIOS.
20	With Yes selected, press Enter. After the PC	Recovery
	restarts, a series of startup screens appear. To
	proceed with the initial Microsoft Windows
	setup, you must answer a few questions.
21	Complete the registration process, and then
	reconnect all peripheral devices.
22	Reinstall software not originally installed on the
	PC by the factory.
23	Copy data files that you saved on the backup
	CD or diskette you made to your hard disk.

Quick Start Guide 99