HP a6347c manual Creating data discs, Making a disc label using LightScribe Technology

Creating data discs

This section provides instructions for burning data files onto a disc.

To create a data disc:

1Insert a writable disc into the disc-burning drive.

2Click the Windows Start Button on the taskbar, All Programs, and then click CyberLink DVD Suite.

3Click the icon in the lower-right corner of the window to open a list of CyberLink programs, and then click Power2Go.

4Click the Data Disc icon.

5Select disc type, and then click OK.

6Locate files from the hard disk drive, and then click and drag them to the lower section of the window.

7 When you are done adding files, click the Burn icon in the toolbar.

NOTE: For more help using CyberLink Power2Go, click the Help icon in the program.

8Select the recording options.

9Click Burn to begin recording your music files to disc.

10Click OK when the data disc is completed.

Making a disc label using LightScribe Technology

(Select models only)

The following section provides instructions for making a disc label by using LightScribe technology. For instructions on making a paper label, refer to “Making a paper disc label.”

What is LightScribe?

LightScribe is an innovative technology that uses a special disc drive, special media (CDs or DVDs), and label-making software to burn labels directly onto CDs and DVDs. A LightScribe-enabled CD or DVD disc drive uses the optical laser in the drive to burn a label onto a thin dye coating on the label side of the disc. There is no ink to smear or paper to curl, and there are no adhesives to loosen.

Creating Audio and Data Discs 175