| Self Test Error Codes | ||
| Self Test Error Codes | ||
1041 | RS232 RI stuck low or high | ||
1042 | RS232 DSR stuck low or high | ||
1043 | RS232 CTS stuck low or high | ||
1044 | RS232 Rx too many bytes |
| |
1045 | RS232 Tx time out |
| |
1046 | RS232 Rx too few bytes |
| |
1047 | RS232 Tx/Rx | data failure |
|
1052 | HPIB driver | chip fails |
|
1060 | RTC set incorrectly |
| |
1061 | RTC not ticking correctly | ||
1070 | Parallel Port failed to | send data | |
1080 | Internal printer fails |
| |
1081 | Keybd proc internal RAM | fails | |
1082 | Keybd proc external RAM | fails | |
1083 | Keybd proc ROM fails |
| |
1084 | Front panel | no response |
|
1085 | Front panel | command not | ok |
1086 | Front panel | returned an | invalid error number |
1087 | Front panel | cpu or UART | error |
1088 | Cannot detect front panel printer | ||
1090 | VRAM data error |
| |
1100 | DISK : no disk in drive |
| |
1101 | DISK : disk | is full |
|
1102 | DISK : disk | write failure | |
1103 | DISK : disk | read failure |
|
1104 | DISK : disk | verify read/write failure | |
1110 | LAN failed 'power on' test | ||
1111 | LAN test returned an invalid error number | ||
1112 | No LAN hardware found |
| |
1113 | LAN fitted, | no test result available | |
1120 | Front panel | no response |
|
1121 | Front panel | command not | ok |
1122 | Front panel | returned an | invalid error number |
1123 | Dual Port SRAM data error | ||
1124 | Dual Port SRAM address error | ||
1130 | Front panel | no response |
|
1131 | Front panel | command not | ok |
1132 | Front panel | returned an | invalid error number |
1133 | Front panel | FEPROM | |
1140 | Front panel | no response |
|
1141 | Front panel | command not | ok |
1142 | Front panel | returned an | invalid error number |
1143 | Front panel | SRAM data error | |
1144 | Front panel | SRAM address error | |
1145 | Front panel | : requested | address range not valid |
1150 | Front panel | no response |
|
6