Power Supply

Installation Instructions

for HP BladeSystem c7000 Enclosures

© Copyright 2006 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

March 2006 (First Edition)

Part Number 413966-001

Power supply bay numbering
Power supply LEDs

Power LED 1

Fault LED 2

Condition

(green)

(amber)

 

 

 

 

Off

Off

No AC power to the power

 

 

supply

 

 

 

On

Off

Normal

 

 

 

Off

On

Power supply failure

 

 

 

Installing a power supply

If your HP BladeSystem c7000 Enclosure is equipped with a three-phase power configuration, six power supplies are required. Single-phase configurations can have fewer than six power supplies.

Install the power supplies based on the total number of supplies needed:
Two power supplies: Bays 1 and 4
Three power supplies: Bays 1, 2, and 4
Four power supplies: Bays 1, 2, 4, and 5