HP BladeSystem C-Class Interconnect Component manual Cisco Catalyst Blade Switch 3120 Series

QuickSpecs

HP BladeSystem c-Class Interconnect Components

Overview

To connect your BladeSystem to outside networks and storage, HP offers a variety of options to support your familiar standards such as Ethernet, Fibre Channel and InfiniBand. The built-in Virtual Connect architecture includes a 5 Terabit backplane, supports 4 redundant fabrics at once and includes 8, high-performance interconnect bays. All interconnect options are hot-pluggable and can be installed in pairs for full redundancy.

Ethernet Switch Modules

	HP 1:10Gb Ethernet BL-c Switch		Cisco Catalyst Blade for 3020
1.	UID LED	1.	Switch Module
2.	Link Activity LEDs	2.	Release latch
3.	Speed LEDs	3.	UID LED
4.	Reset Button	4.	SFP Module Port LED
5.	RJ-45 1Gb Uplink Ports	5.	SFP Module Ports for SX/LX Fiber
6.	10Gb XFP Module Cages	6.	Gigabit Ethernet Port LEDs
7.	10Gb CX4 Uplink Port	7.	Gigabit Ethernet RJ-45 Ports
8.	DB-9 Serial Management Port	8.	Health LED
9.	Health LED	9.	Mode Button
		10.	Switch LED Panel

		Cisco Catalyst Blade Switch 3120 Series
1.	Switch Module	8.	Slot for Cisco Twin Gigabit Module or X2 Transceiver
			module.
2.	UID LED	9.	LEDs for ports 21 -22
3.	Health LED	10.	Slot for Cisco Twin Gigabit Module or X2 Transceiver module

DA - 12524 Worldwide — Version 11 — July 14, 2008 Page 1