Setting Up Your Camera

Installing a New Coin Battery

When you buy the camera, a coin battery is already installed. Follow these directions if you need to install a new coin battery.

Caution: Use only a CR2025 or equivalent 3 volt coin battery. Always follow instructions on the battery package when handling or disposing of batteries.

To install a coin battery:

1.Make sure the camera power is off.

2.Remove the coin battery compartment cover by placing the edge of a coin in the groove and turning it counter-clockwise until it stops.

3.Insert the coin battery, so you see the positive (+) side facing up.

4.Replace the coin battery compartment cover and turn it clockwise until it stops.

HP PhotoSmart C500 Digital Camera User’s Guide

8