Taking Still, Burst and Timelapse Photos
6.When you see a green light to the left of the viewfinder, press the Shutter button all the way down to take the first photo. Wait for the beeps, indicating the photo has been taken, before releasing the Shutter button.
The camera automatically takes the number of photos at the time interval specified in the Timelapse settings.
Tip: If you want to stop taking photos before the camera reaches the number of photos specified in the Timelapse settings, press the Stop button (right soft key).
7.If Instant Review is on and you are using an AC power adapter, your first photo appears on the color LCD; an indicator on the upper overlay bar shows the number of photos that have been taken and a timer counts down the time until the next photo is taken.
If Instant Review is on and you are using batteries, your first photo appears briefly on the color LCD. The color LCD turns itself off after 30 seconds.
Once the series of photos has been taken and the first photo appears on the color LCD, press the Save button (right soft key) to save the series of photos on the memory card, or press the Delete button (center soft key) to discard the photos and try again. Pressing Delete discards the entire series of photos, not just the first one. If you do not press either button, the camera automatically saves the photos.
To change the Timelapse settings:
1.Turn the camera on and turn the camera mode dial to Rec.
2.Press the Menu button.
The color LCD displays the Media Settings menu.
3.Use the
4.Press the Edit button (left soft key).
HP PhotoSmart C500 Digital Camera User’s Guide | 40 |