B2 Choose the correct CD

Windows Users:

aTurn on your computer, login if necessary, and then wait for the desktop to appear.

bInsert the HP All-in-One CD

Note: If the startup screen does not appear, double- click My Computer, double- click the CD-ROM icon with the HP logo, and then double-click setup.exe.

cFollow the onscreen instructions to install the software.

dOn the Connection Type screen, make sure to select through the network. Follow the onscreen instructions.

eYour firewall software may provide prompts on your computer warning you that HP software is attempting to access your network. You should respond to these prompts so that access is “always” allowed. Then continue with the HP software installation.

fContinue to the next page.

Questions: Anti-virus and anti-spyware applications may block software installation and may need

to be disabled. Remember to turn them back on again following installation.

Mac Users:

aTurn on your computer, login if necessary, and then wait for the desktop to appear.

bInsert the HP All-in-One Mac CD.

cDouble-click the HP All-in-One installer icon.

dMake sure you complete all screens, including the Setup Assistant. To install software on additional computers, go to step 14.

B3 Congratulations! Go to step 16 of this setup guide

10 • HP All-in-One