15 Choose ONE connection type (A, B or C)

A: USB Connection - Do not connect yet

Use this connection type if you want to connect the HP All-in-One directly to one computer. (Do not connect the USB cable until step A2).

Equipment needed: USB cable.

For a USB connection, go to Section A (page 7) for instructions.

B: Ethernet (Wired) Network

Use this connection type if you want an Ethernet cable connection between the HP All-in-One and your network.

Equipment needed: router and Ethernet cable.

For an Ethernet cable connection, go to Section B (page 9) for instructions.

C: Wireless Network

Use this connection type if you want a wireless

(802.11 b or g) connection between the HP All-in-One and your network. Equipment needed: wireless router*.

For a wireless network connection, go to Section C1 (page 11) for instructions.

*Note: If you do not have a wireless router, but want to connect your wireless computer to the HP All-in-One, see the Wireless Ad Hoc Network Setup section in the Basics Guide.

6 • HP All-in-One