HP C6100 A1Choose the correct CD, Section A: USB Connection

Section A: USB Connection

A1 Choose the correct CD

Windows Users:

aTurn on your computer, login if necessary, and then wait for the desktop to appear

bInsert the HP All-in-One Windows CD..

Note: If the startup screen does not appear, double- click My Computer, double-click the CD- ROM icon with the HP logo, and then double-click setup. exe.

cFollow the onscreen instructions to install the software.

dOn the Connection Type screen, make sure to select directly to this computer. Continue to the next page.

eContinue to the next page.

Mac Users:

aTurn on your computer, login if necessary, and then wait for the desktop to appear.

bLocate the HP All-in-One Mac CD.

cContinue to the next page.

HP All-in-One • 7

Contents

1 Important setup information Remove all tape and lift display 3 Locate components (if not attached) Load paper into bottom tray Load photo paper 7 Connect the supplied phone cord 8 Connect the power cord and adapter Press the On button Open the access door Lift latches inside of the device Insert all six ink cartridges 13 Close the access door and follow the prompts 14 Connect the HP All-in-One 15 Choose ONE connection type (A, B or C) A: USB Connection - Do not connect yet B: Ethernet (Wired) Network C: Wireless Network Section A: USB Connection A1Choose the correct CD A2Connect the USB cable A3Congratulations! Go to step 18 of this Setup Guide Section B: Ethernet (wired) network Connect the Ethernet cable B2 Choose the correct CD B3 Congratulations! Go to step 16 of this setup guide Section C: Wireless Network C1Choose ONE wireless network option (A or B) C2Establish the wireless connection Option A: SecureEasySetup Option B: Typical Wireless Setup (Recommended) C3Insert the correct CD C4Congratulations! Go to step 16 of this setup guide 16 Install software on additional computers 17 Go to step 18 at the back of this setup guide Troubleshooting Network Troubleshooting 18 Print a 4 x 6 inch photo